IROAD FX2
140º Wide Viewing Angle | Battery Discharge Prevention | Format Free 2.2
Mobile APP (Android/iOS) | Windows/Mac Viewer
1080P FHD & FHD 2CH
CMOS Image Sensors allow constant FHD 1080p Front and FHD 1080p Rear recording during both daytime and nighttime along with a 140-degree wide angle lens view. This will minimize blind spots to assure recording of all events without fail.
LONG DRIVE RECORDING WITH
HYPER LAPSE
No more worries about missing out while driving long-distance
By compressing the recorded video, Hyper Lapse minimizes the memory space and saves 4 times more footage.
However, when an event or impact occurs, recording frame rate switches automatically to 30 fps to provide clearer images of important moments.
LONG PARKING RECORDING WITH
TIME LAPSE
Experience IROAD FX2 continuous Parking Mode recording for a long time with IROAD Time Lapse.
Time Lapse is a low-capacity recording method that minimizes the storage space by compressing and saving at 1fps while in Parking Mode.
On the other hand, when an impact or motion is detected during Parking Mode, it switches automatically to 30 fps to provide clearer images of important moments.
PARKING MODE | NORMAL | TIME LAPSE |
|---|---|---|
CAPACITY | 32GB | 32GB |
FPS | 30 fps | 1 fps |
RECORDING TIME | About 4H | About 48H |
IROAD FX2 VARIOUS AUTONOMOUS RECORDING MODES
CONTINUOUS RECORDING MODE
This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.
EVENT RECORDING MODE
It will automatically start an Event recording when motion or impact is detected around the vehicle during both parking and driving mode.
MANUAL RECORDING
Generate Event files on request when witnessing a traffic incident or something interesting on the road that you want to make sure you catch on camera. When pressing the Manual Recording button, the dash cam records and separately stores a few seconds of footage before (5-10s) and after (15-20s) that moment as a Manual Recording file protected from overwriting (limit before overwriting: up to max. 4% of total SD card storage).
PARKING IMPACT BUFFERED RECORDING
When in Parking Mode, the built-in G sensor detects when an impact with the vehicle has occurred, for which the dash cam generates an event file stored separately, protected from overwriting (if SD card storage is assigned to Event files through the dash cam settings). The saved video will include a few seconds before the impact occurred (5-10s) and a few seconds after (15-20s). This can be turned ON regardless of the Parking Mode used (Time-lapse or Motion Detection).
TIME-LAPSE PARKING MODE
The dash cam will continuously record at 1fps during Parking Mode. If Parking Impact is turned ON, the frame rate will briefly switch from 1fps to 30fps when recording the impact, then the dash cam will continue recording at 1fps.
MOTION DETECTION PARKING MODE
The dash cam stays “asleep” until it detects movement around the vehicle. In this mode, any motion happening around the vehicle in recorded in an event file stored separately. The saved video will include a few seconds before the motion was detected (5-10s) and a few seconds after (15-20s).
